Automobile aluminum alloy flange tells about the application of flange?

Flange is abbreviated as flange, which is just a general term. It usually refers to the opening of several fixed holes on the periphery of a disk-like metal body for connecting other things. Let's follow the editor of automobile aluminum alloy flange to see what its applications are!
The part that connects the pipe and the pipe, is connected to the pipe end. There are holes on the flanges, and bolts make the two flanges tightly connected. Intermediate gasket. Flange through a pair of flanges, washers and multiple bolts and nuts. The gasket is placed between the two flange sealing surfaces, after tightening the nut, the gasket ratio deformation pressure on the upper surface reaches a certain value, and fills the irregularities on the sealing surface, the connection is not tight and leaks. By structural type, and integral type, socket line type and type. Type flange sealing surface in three ways: the pressure of the flat sealing surface is not suitable for high, medium and non-toxic occasions. Uneven sealing surface for higher pressure situations. Tongue and groove sealing surface, suitable for flammable, explosive, toxic media and high pressure occasions. Plastically deformable gaskets, and rings made of materials with a certain strength. Most of the non-metallic spacer plates are cut from the bottom, or by professional manufacturers according to the predetermined size, the material is asbestos, asbestos, rubber sheet of polyethylene sheet, etc. Also useful for wrapping wound washers made of a thin metal plate (tin, stainless steel) asbestos and other non-metallic materials. There are thin strips of asbestos tape wound pads formed by winding them together. Suitable temperature common rubber gasket is greater than 120 degrees to reduce the temperature. It is suitable for steam temperature asbestos rubber gaskets lower than 450 °C, and when the oil temperature exceeds 350 °C, the pressure ratio here is 5MPa. For general corrosive media, acid asbestos is usually used. In high pressure equipment and piping, copper, aluminum, steel No. 10, lens type, or other shapes of metal gaskets made of stainless steel. With high pressure pads and a narrow width of the sealing surface, the gasket has a high machined finish to the sealing surface contact.
The above is the introduction about its application in this automotive aluminum alloy flange editor, I hope it can help you.

None

Introduction of flange

None

Introduction of flange